MSE casting furnaces are designed to the melting of the materials and fill them to molds.
This device can be preferred for aluminum smelting. Argon or nitrogen use as a protective gas throughout the process. Firstly, the material is heated and mixed. Later on, casting rod lift up, the melting material is poured into the crucible. The casting moment can be followed through the observation glass.
Programmable step controller via digital display
Observation of set and real temperature
Delayed start and program save feature
Temperature control via PID and ±1°C temperature display sensitivity
System protection for over temperature, audio visual warning alarm
Temperature measurement via thermocouples
Error display in case a breakdown
Percentage of electrical energy consumption
Able to resume the program after the power failure
Heating on each side
High-quality fiber and brick insulated heat zone
Low energy consumption
Lid on top
Melting and manual casting system
Protective gas inlet and manual gas flowmeter
Atmosphere controlled mould chamber and casting observation window
Siphon type melting pot
Low external surface temperature (Ambient +40°C)
thanks to double-layers steel construction
Epoxy painted galvanized-steel exterior
Height adjustable, non-slip rubber feet.
(DL) Data logger
(PCC) PC Communication and Software
(AC) Automatic Casting
For the maximum life of the furnace and the longer use of the furnace equipment, we recommend that the heating rate of 10°C/min is not exceeded. Flammable and explosive products must not be used in the furnace.
Casting furnaces are available in wide a ranges of volumes and temperatures up to 1600°C continuous use. Please contact us for the detailed information.