Proje Açıklaması

CHEMICAL GLASS
TEMPERING
FURNACE

TMAX 900°C

Chemical tempering is one of the methods used to increase the surface hardness of glass. In this method, it is ensured that the sodium atoms in the glass are replaced with potassium atoms in the region close to the surface.

PRODUCT SHEET

PRODUCT INFORMATION

Chemical tempering is one of the methods used to increase the surface hardness of glass. In this method, it is ensured that the sodium atoms in the glass are replaced with potassium atoms in the region close to the surface. This creates a tension on the surface.

It gives strength and hardness to the glass. In the glass tempering furnaces produced by our company, the glass is heated by a constant temperature increase so that the glass is not broken by thermal shocks, then it is immersed in the salt bath. After being kept in a salt bath for a sufficient time, it is cooled slowly. All this is done automatically with a pre-installed program.

Chemical glass tempering furnaces are designed according to customer requirements and glass holding baskets are designed by our company. Tablet, telephone, solar panel and television glass are examples of glass produced by chemical tempering. This method is a unique method for increasing the strength of thin glasses.

STANDARD FEATURES

  • Programmable step controller via digital display

  • Observation of set and real temperature

  • Delayed start and program save feature

  • Temperature control via PID and ±1°C temperature display sensitivity

  • System protection for over temperature,audio visual warning alarm

  • Error display in case a breakdown

  • Percentage of electrical energy consumption

  • Able to resume the program after the power failure

  • Low energy consumption

  • Temperature measurement via protected thermocouple

  • Two-zone heating system

  • Top zone; for preheating and slow cooling control

  • Bottom zone; for salt bath heating

  • Protected cabin, automatic opening, sample loading and removal

  • Sample feeding system with lift

  • Stainless steel sample basket

  • Dropping pan

  • High-quality brick and fiber insulation, low energy consumption

  • Reinforced with the stainless steel structure

  • Protected automatic opening lid for salt bath

OPTIONAL FEATURES

  • (DL) Data Logger

APPLICATION NOTES

For the maximum life of the furnace and the longer use of the furnace equipment, we recommend that the heating rate of 10°C/min is not exceeded. Flammable and explosive products must not be used in the furnace.

The salt which is inside the furnace must not touch with any water piece. For long-term breakdown stays the salt may get solid. In this cases, it is better to pre-heating without a sample.

SERIES

Chemical Glass Tempering furnaces are available in wide a ranges of volumes and temperatures from 650°C to 900°C continuous use.

UP TO 3000°C

ENGINEERED
HIGH QUALITY FURNACES