Project Description

CHEMICAL GLASS
TEMPERING
FURNACE

TMAX 900°C

Chemical tempering is one of the methods used to increase the surface hardness of glass. In this method, it is ensured that the sodium atoms in the glass are replaced with potassium atoms in the region close to the surface.

PRODUCT SHEET
GET IN TOUCH
GO BACK

PRODUCT INFORMATION

Chemical tempering is one of the methods used to increase the surface hardness of glass. In this method, it is ensured that the sodium atoms in the glass are replaced with potassium atoms in the region close to the surface. This creates tension on the surface of the glass. It gives strength and hardness to the glass.

In the chemical glass tempering furnace is produced by our company, the glass is heated by a constant temperature increase, then it is immersed in the salt bath. After being kept in a salt bath for a sufficient time, it is cooled slowly. So that the glass is not broken by thermal shocks and hardness of the surface of the glass increases.

All this is done automatically with a pre-installed program at chemical glass tempering furnace. Chemical glass tempering furnace and glass holding baskets can be designed and produced by our company. This feature allows the use of tempered glass in various fields such as automotive, electronics, architectural, aeronautical, naval and military. This method is a unique method for increasing the strength of thin glasses. MSE is produced up to 900 °C chemical glass tempering furnace.

STANDARD FEATURES

  • Programmable step controller via digital display

  • Observation of set and real temperature

  • Delayed start and program save feature

  • Temperature control via PID and ±1°C temperature display sensitivity

  • System protection for over temperature,audio visual warning alarm

  • Error display in case a breakdown

  • Percentage of electrical energy consumption

  • Able to resume the program after the power failure

  • Temperature measurement via protected thermocouples

  • Two-stage heating system

  • Heating on all each side

  • High-quality brick and fiber insulation, low energy consumption

  • First stage: for pre-heating and slow cooling

  • Second stage: salt bath

  • Fan system

  • Protected cabin

  • Loading/unloading on top via elevator

  • Stainless steel basket

  • Changeable salt bath and high corrosion resistant

  • Aluminium construction

  • Table top usage

OPTIONAL FEATURES

  • (PLC) PLC control and touch screen

APPLICATION NOTES

For the maximum life of the furnace and the longer use of the furnace equipment, we recommend that the heating rate of 10 °C/min should not exceeded. Flammable and explosive products must not be used in the furnace.

The chemical salt which is inside the furnace must not touch with water and with damp any pieces.

If the salt long-term as cold stays, it may get solid. In these cases, it is better to pre-heating without a sample.

SERIES

Chemical glass tempering furnaces are manufactured in different volumes up to 900°C temperatures on demand by the customer.

GO BACK

Please follow us on social media for news & events.

UP TO 3000°C

HIGH-QUALITY
ENGINEERED FURNACES