Project Description

LIFT BOTTOM FURNACE

TMAX 1800°C

MSE’s lift bottom furnaces are ideal for dental ceramic firing and glass melting applications up to 1800ºC.

PRODUCT SHEET

PRODUCT INFORMATION

MSE’s lift bottom furnaces are ideal for dental ceramic firing and glass melting applications up to 1800ºC. The lift bottom design raise sample to inside the furnace without any lid. The product is raised to the furnace with the base of the elevator mechanism without lid on the front surface.

Homogeneous temperature distribution is provided by heating elements placed in the cubic furnace chamber. The biggest advantage of the elevator furnaces is the easy placement of the sample with the up-down moving base, the easily refractory changes without any technical service for damage to the base refractory such as glass shedding or product melting, better protection of the heating elements and less exposure of the user to high temperature compared to the lid models.

STANDARD FEATURES

  • Programmable step controller via digital display

  • Observation of set and real temperature

  • Delayed start and program save feature

  • Temperature control via PID and ±1°C temperature display sensitivity

  • System protection for over temperature, audio visual warning alarm

  • Temperature measurement via thermocouples

  • Error display in case a breakdown

  • Percentage of electrical energy consumption

  • Able to resume the program after the power failure

  • Heating on each side

  • Exhaust gas outlet

  • High-quality fiber and brick insulated heat zone

  • Low energy consumption

  • Bottom design with elevator

  • Low external surface temperature (Ambient +40°C) thanks to double-layers steel construction

  • Epoxy painted galvanized-steel exterior

  • Height adjustable, non-slip rubber feet.

OPTIONAL FEATURES

  • (WS) Standing Furnace

  • (DL) Data Logger

  • (WG) Gas inlet and manual gas flowmeter

  • (PCC) PC Communication and Software

APPLICATION NOTES

For the maximum life of the furnace and the longer use of the furnace equipment, we recommend that the heating rate of 10°C/min should not exceeded. Flammable and explosive products must not be used in the furnace.

SERIES

Lift bottom furnaces are available in wide a ranges of volumes and temperatures from 1100°C to 1800°C continuous use. The standard models of Lift bottom / Glass melting furnaces are listed below.

  • ELV_1300

  • ELV_1500

  • ELV_1600

  • ELV_1800

TECHNICAL INFO CHARTS

You can see techical info chart of our lift bottom / retort furnaces series.

PRODUCT
CODE
MAX. TEMP.
°C
VOLUME
(L)
INTERNAL DIMENSIONS
Width
(mm)
Height
(mm)
Depth
(mm)
ELV_1300_413004165150165
ELV_1300_513005170175170
ELV_1300_813008200200200
ELV_1300_12130012200300200
ELV_1300_18130018250250300
ELV_1300_25130025250250400
ELV_1300_36130036300300400
ELV_1300_*1300****
*Produced on demand by the customer.
PRODUCT
CODE
MAX. TEMP.
°C
VOLUME
(L)
INTERNAL DIMENSIONS
Width
(mm)
Height
(mm)
Depth
(mm)
ELV_1500_415004165150165
ELV_1500_515005170175170
ELV_1500_815008200200200
ELV_1500_12150012200300200
ELV_1500_18150018250250300
ELV_1500_25150025250250400
ELV_1500_36150036300300400
ELV_1500_*1500****
*Produced on demand by the customer.
PRODUCT
CODE
MAX. TEMP.
°C
VOLUME
(L)
INTERNAL DIMENSIONS
Width
(mm)
Height
(mm)
Depth
(mm)
ELV_1600_116001100100100
ELV_1600_416004165150165
ELV_1600_516005170175170
ELV_1600_816008200200200
ELV_1600_12160012200300200
ELV_1600_18160018250250300
ELV_1600_25160025250250400
ELV_1600_36160036300300400
ELV_1600_*1600****
*Produced on demand by the customer.
PRODUCT
CODE
MAX. TEMP.
°C
VOLUME
(L)
INTERNAL DIMENSIONS
Width
(mm)
Height
(mm)
Depth
(mm)
ELV_1800_118001100100100
ELV_1800_518005170170175
ELV_1800_818008200200200
ELV_1800_12180012200200300
ELV_1800_*1800****
*Produced on demand by the customer.

UP TO 3000°C

ENGINEERED
HIGH QUALITY FURNACES