MSE Quench Furnace are suitable for small parts of electrical components.
At the same time, this furnace is complise with the AMS 2750 standard. Quench furnaces can be easily carry out quenching process of copper and aluminum alloys by entegre water chamber. This furnace can also be used for annealing similar products.
Able to set programmable temperature, time and soaking time, display of cooling water temperature and process details, and data save by USB connection feature via PLC controller, touch screen
Temperature control via PID and ±1°C temperature display sensitivity
System protection for over temperature. Audio visual warning alarm
Temperature measurement via thermocouple
Error display in case a breakdown
Heating on all side
Exhaust gas outlet connected to inner volume
High-quality insulated heat zone
Low energy consumption
Automatic energy cut while lift bottom opening and do not able to work unless lid is closed
10-1 mbar standard vacuum pump with the purpose of purge the air
Protective gas inlet and outlet
Lid, gas and vacuum sensitivity, cooling cabin temperature alarm
Adjustable manual gas flowmeter
Basket for samples
Sample drying unit
Sample loading via lift bottom to the heat zone
Low external surface temperature (Ambient +40°C) thanks to double-layers steel construction
Epoxy painted galvanized-steel exterior
Height adjustable, non-slip rubber feet.
Usage with standing
(PCC) PC Communication and Software
(DL) Data Logger
For the maximum life of the furnace and the longer use of the furnace equipment, we recommend that the heating rate of 10°C/min should not exceeded. Flammable and explosive products must not be used in the furnace.
MSE Quench Furnaces are produced different sizes and temperatures on demand by the customer.Please contact us for detailed information.