Project Description

RAPID HEAT
TREATMENT
FURNACE

TMAX 1100°C

This furnace is suitable for heating and cooling with very high accelerations. The pre-heated furnace proceeds on the stationary specimen and performs heat treatment at the desired ramp.

PRODUCT SHEET

PRODUCT INFORMATION

This furnace is suitable for heating and cooling with very high accelerations. The pre-heated furnace proceeds on the stationary specimen and performs heat treatment at the desired ramp.

Since the sample is in a quartz tube, heat treatment can be performed under the desired atmosphere. All operations are done automatically by setting on a screen. In this furnace, graphene, carbon nano tube placement, rapid pyrolysis, rapid heat treatment, thermal shock processes can be done easily.

STANDARD FEATURES

  • PLC and touch screen

  • Observation of set and real temperature

  • ±1°C temperature display sensitivity

  • System protection for over temperature. audio visual warning alarm

  • Temperature measurement via thermocouples

  • Error display in case a breakdown

  • Heating on both side

  • High-quality insulated heat zone

  • Low energy consumption

  • Heat shields

  • Stainless steel gas inlet and outlet flanges

  • Manual flowmeter

  • Proper tube for usage temperature

  • Low external surface temperature (Ambient +40°C)
    thanks to double-layers steel construction

  • Epoxy painted galvanized-steel exterior

  • Height adjustable, non-slip rubber feet.

  • Max. Heating Speed: 50ºC/s

  • Max. Cooling Speed from 900°C to 200°C;

    • 8.3°C/s (900°C – 600°C)
    • 4.4°C/s (600°C – 500°C)
    • 2.8°C/s (500°C – 400°C)
    • 1.6°C/s (400°C – 300°C)
    • 0.9°C/s (300°C – 200°C)
  • Material and Sizes of Tube High purity melted quartz Ø80mm OD x 1400mm L

  • Sliding Rail System: Cr coated double-hung

  • DC motor propulsion

  • Sliding range: 340mm

  • Sliding speed: 0-70 mm/s

  • Power: 9 kW

  • Voltage: AC 208-240 V Single Phase, 50/60 Hz

  • Use temperature of Quartz Tubes:

    • 1000°C (<1 hours )
    • 800°C (<2 hours)
    • 600°C (continuous)

APPLICATION NOTES

The furnace has a heating rate of >50°C / s and a cooling rate of >10°C/s. Fast heating is achieved by the hot furnace body advancing over the sample. Similarly, cooling is achieved by pulling the furnace over the sample. Flammable and explosive products must not be used in the furnace.

SERIES

Cooling controlled rapid heat treatment furnaces are available in wide a ranges of volumes and temperatures up to 1100°C continuous use. Please contact with us for detailed information.

UP TO 3000°C

ENGINEERED
HIGH QUALITY FURNACES