Project Description

CASTING FURNACE

TMAX 1600°C

MSE casting furnaces are designed to the melting of the materials and fill them to moulds.

This device can be preferred for aluminium smelting. Argon or nitrogen gas are used throughout the process.

PRODUCT SHEET
GET IN TOUCH
GO BACK

PRODUCT INFORMATION

MSE Casting Furnace is designed to the mixing, melting of the material under the temperature and fill to a mould. This device can be preferred for aluminium smelting. Argon or nitrogen use as a protective gas throughout the process.

Firstly, the material is heated and mixed. Later on, casting rod lift up, the molten material is poured into the crucible inside of the casting furnace cabin. The casting can be followed through the observation glass that in front of the furnace.

STANDARD FEATURES

  • Programmable step controller via digital display

  • Observation of set and real temperature

  • Delayed start and program save feature

  • Temperature control via PID and ±1°C temperature display sensitivity

  • System protection for over temperature, audio visual warning alarm

  • Temperature measurement via thermocouples

  • Error display in case a breakdown

  • Percentage of electrical energy consumption

  • Able to resume the program after the power failure

  • Heating on each side

  • High-quality fiber and brick insulated heat zone

  • Low energy consumption

  • Loading on top

  • Melting and manual casting system

  • Mechanical mixer

  • Gas inlet and manual gas flowmeter

  • Atmosphere controlled mould chamber and casting observation glass

  • Graphite melting crucible

  • Low external surface temperature (Ambient Temp. +40°C)
    thanks to double-layers steel construction

  • Epoxy painted galvanized-steel exterior

  • Height adjustable, non-slip rubber feet.

OPTIONAL FEATURES

  • (DL) Data logger

  • (PCC) PC Communication and Software

  • (AC) Automatic Casting

  • (TC) Tilting casting

  • (M) Casting mould

  • (V) Vacuum

APPLICATION NOTES

For the maximum life of the furnace and the longer use of the furnace equipment, we recommend that the heating rate of 10°C/min is not exceeded. Flammable and explosive products must not be used in the furnace.

SERIES

Casting furnaces are available in wide a ranges of volumes and temperatures up to 1600°C continuous use. Please contact us for the detailed information.

GO BACK

Please follow us on social media for news & events.

UP TO 3000°C

HIGH-QUALITY
ENGINEERED FURNACES