A frit is produced by melting raw materials in the form of powder or granules by mixing them in a fairly homogeneous manner.
Melting process is carried out in these furnaces at temperatures of about 1000°C-1600°C. Frit furnaces are available in wide a ranges of volumes from 0.1 liter to 500 litres and temperatures up to 1600°C continuous use.
The frit is obtained by melting the raw materials according to a recipe and melting at a high temperature and rapid cooling of the molten. Raw materials that have already been pelleted are fed into the furnace automatically. The melting temperature is reached with the desired program and after waiting for a certain time at this temperature, the furnace bottom cover is opened and frit is poured.
The system can then perform the same cycle again and automatically. All these operations are programmed via a touch screen. In this system which provides automatic operation, frit production can be done without stopping. The furnace crucible can be removed and cleaned for different composition studies. Please contact us for this type of product.
Programmable step controller via digital display
Observation of set and real temperature
Delayed start and program save feature
Temperature control via PID and ±1°C temperature display sensitivity
±1°C temperature display sensitivity
System protection for over temperature, audio visual warning alarm
Temperature measurement via thermocouples
Error display in case a breakdown
Percentage of electrical energy consumption
Able to resume the program after the power failure
Heating on around
Exhaust gas outlet connected to inner volume
High-quality insulated heat zone
Low energy consumption
Integrated pouring basin to furnace
Low external surface temperature (Ambient +40°C)
thanks to double-layers steel construction
Epoxy painted galvanized-steel exterior
Height adjustable, non-slip rubber feet.
Continuous operating feature
(DL) Data logger
(PCC) PC Communication and Software
(AF) Automatic feed
For the maximum life of the furnace and the longer use of the furnace equipment, we recommend that the heating rate of 10°C/min . Flammable and explosive products must not be used in the furnace.
Frit furnaces are available in wide a ranges of volumes from 0.1 liter to 500 litres and temperatures up to 1600°C continuous use.