Metal heat treatment furnace is designed for making the heat treatment of various solid metal parts (hardening, tempering, quenching etc.) on a laboratory scale. Metal heat treatment furnace can be used vertically or horizontally.
If the furnace used vertical, the solid sample is placed in the middle part of the furnace by means of a wire. After the heating the solid sample which is as automatic dropped down into the liquid placed under the furnace, can be cooled suddenly. The required protective gas and vacuum atmosphere can be created inside of mullite, quartz and alumina tube that it will be chosen according to the temperatures and using.
The process can be also continued without sample dropping at the desired conditions in the metal heat treatment furnace.
Programmable step controller via digital display
Observation of set and real temperature
Delayed start and program save feature
Temperature control via PID and ±1°C temperature display sensitivity
System protection for over temperature. Audio visual warning alarm
Temperature measurement via thermocouples
Error display in case a breakdown
Percentage of electrical energy consumption
Able to resume the program after the power failure
Heating on both side
High-quality insulated heat zone
Low energy consumption
Stainless steel gas inlet and outlet flanges
Manual gas and water flowmeter
Vertical or horizontal operating
Proper tube for usage temperature
Automatic sample dropping system
Low external surface temperature (Ambient +40°C)
thanks to double-layers steel construction
Epoxy painted galvanized-steel exterior
Height adjustable, non-slip rubber feet.
(ET) External Temperature measurement from within the furnace
(PCC) PC Communication and Software
(DL) Data Logger ***
(V) Vacuum Pump
For the maximum life of the furnace and the longer use of the furnace equipment, we recommend that the heating rate of 10°C/min should not exceeded. If an alumina is to be used for the furnace, we suggest 7°C/min heat rate.
Flammable and explosive products must not be used in the furnace. The flowmeters supplied with the system are manual and do not have high precision. Select (MFC) option for high-precision flowmeter option. (*) Process requirements may vary depending on temperature and furnace models and may not be applicable for each model.
Metal heat treatment furnaces are available in wide a ranges of volumes and temperatures up to 1500°C continuous use. Please contact with us for detailed information.
Please follow us on social media for news & events.