Project Description
PRODUCT INFORMATION
MSE Casting Furnace is designed to the mixing, melting of the material under the temperature and fill to a mould. This device can be preferred for aluminium smelting. Argon or nitrogen use as a protective gas throughout the process.
Firstly, the material is heated and mixed. Later on, casting rod lift up, the molten material is poured into the crucible inside of the casting furnace cabin. The casting can be followed through the observation glass that in front of the furnace.
STANDARD FEATURES
Programmable step controller via digital display
Observation of set and real temperature
Delayed start and program save feature
Temperature control via PID and ±1°C temperature display sensitivity
System protection for over temperature, audio visual warning alarm
Temperature measurement via thermocouples
Error display in case a breakdown
Percentage of electrical energy consumption
Able to resume the program after the power failure
Heating on each side
High-quality fiber and brick insulated heat zone
Low energy consumption
Loading on top
Melting and manual casting system
Mechanical mixer
Gas inlet and manual gas flowmeter
Atmosphere controlled mould chamber and casting observation glass
Graphite melting crucible
Low external surface temperature (Ambient Temp. +40°C)
thanks to double-layers steel constructionEpoxy painted galvanized-steel exterior
Height adjustable, non-slip rubber feet.
OPTIONAL FEATURES
(DL) Data logger
(PCC) PC Communication and Software
(AC) Automatic Casting
(TC) Tilting casting
(M) Casting mould
(V) Vacuum
APPLICATION NOTES
For the maximum life of the furnace and the longer use of the furnace equipment, we recommend that the heating rate of 10°C/min is not exceeded. Flammable and explosive products must not be used in the furnace.
SERIES
Casting furnaces are available in wide a ranges of volumes and temperatures up to 1600°C continuous use. Please contact us for the detailed information.
Please follow us on social media for news & events.
UP TO 3000°C