Metal heat treatment furnace can use both horizontally and vertically. It is designed to perform heat treatment (hardening, tempering, etc.) of various solid metal samples on a laboratory scale.
If the furnace used vertical, the solid sample is placed in the middle part of the furnace by means of a wire. After the heating, the solid sample which dropped as automatically down into the liquid placed under the furnace can be cooled suddenly. The required protective gas and vacuum atmosphere can be created inside of mullite, quartz, alumina tubes that are chosen according to usage temperatures.
The process can be also continued without sample dropping at the desired conditions in the metal heat treatment furnace.
Programmable step controller via digital display
Observation of set and real temperature
Delayed start and program save feature
Temperature control via PID and ±1°C temperature display sensitivity
System protection for over temperature. Audio visual warning alarm
Temperature measurement via thermocouples
Error display in case a breakdown
Percentage of electrical energy consumption
Able to resume the program after the power failure
Heating on both side
High-quality insulated heat zone
Low energy consumption
Stainless steel gas inlet and outlet flanges**
Manual gas flowmeter
Vertical or horizontal operating
Suitable tube to usage temperature
Automatic sample dropping system
Low external surface temperature (Ambient Temp. +40°C)
thanks to double-layers steel construction
Epoxy painted galvanized-steel exterior
Height adjustable, non-slip rubber feet.
(ET) The charge thermocouple
(PCC) PC Communication and Software
(DL) Data Logger ***
(V) Vacuum Pump
For the maximum life of the furnace and the longer use of the furnace equipment, we recommend that the heating rate of 10°C/min should not exceed. If the alumina tube will be used, we recommended that the heating rate of 7 °C/min should not exceed. Flammable and explosive products must not be used in the furnace.
The flowmeter which is included the furnace is manual but also not high sensitivity. For the higher sensitive ones please get in touch.
The features which are signed with a star (*) may get change or not available according to the change on process necessity, volume, temperature and furnace model. (**) It may get change as water-cooled according to the temperature.
Metal heat treatment furnaces are manufactured in wide a range of diameters, different heating length and up to 1500°C continuous usage temperature according to customer’s request. Please contact us for more details.
Please follow us on social media for news & events.